Individual skill

solidworks-fillet-chamfer-cnc

SolidWorks CNC 零件的多圆角/倒角自动化子技能。用于安装座、连接块、支架、沉孔板等模型的参数预检、语义选边、多控制点可变半径、face/full-round/setback、G2 曲面组合、宽度-宽度倒角、角度倒角、孔口倒角、CNC 友好口袋、有界降级和重建证据。

subskills/solidworks-fillet-chamfer-cnc/SKILL.md

Read pinned source

Source commit 9ba848e301e996cc64d8078df13f4ccc24416339

What was checked

Matches the observed repository HEAD: Yes
Scanner rules are current: Yes
Repository scan complete: No
Skill scan complete: No
Observed behavior: Network or broad shell
Last checked: Nov 9, 2026

These are observations at the recorded commit, not a guarantee of safety. Review the source before running it.

Install this skill

Choose an agent in your Stack or copy a command below. Commands fetch the pinned commit and copy only this skill directory. Existing destinations are refused. Copying a command does not install anything.

An install command is unavailable: current rules, complete repository and skill scans, an eligible behavior level and a permitted license are required.

Repository context

Repository stars (not skill ratings): 1,922
Repository last updated: Nov 4, 2026
License: MIT

Observed agent integration: No specific integration evidence. Standard SKILL.md installation does not imply verified compatibility.

autocad Repository topic
cad Repository topic
claude Repository topic
codex Repository topic
dwg Repository topic
dxf Repository topic
mcp Repository topic
mechanical-design Repository topic
python Repository topic
solidworks Repository topic
engineering Derived category

Files and excerpt

File metadata and permitted, redacted excerpts come from the recorded scan. Source links are pinned to that commit.

Browse files

README.mddoc · 4,527 bytes
SKILL.mdcore · 9,190 bytes
SKILL.mdcore · 9,190 bytes
SKILL.mdcore · 9,190 bytes
SKILL.mdcore · 9,190 bytes
SKILL.mdcore · 9,190 bytes
SKILL.mdcore · 9,190 bytes
SKILL.mdcore · 9,190 bytes
SKILL.mdcore · 9,190 bytes
agents/openai.yamlasset · 298 bytes
evals/evals.jsonasset · 1,826 bytes
examples/cnc_mount_precision_params.jsonasset · 900 bytes
examples/open_source_corner_bracket_case.jsonasset · 1,198 bytes
manifest.yamlasset · 789 bytes
references/cnc-fillet-chamfer-lessons.mddoc · 13,493 bytes
scripts/advanced_fillet_strategy.pyruns · 13,459 bytes
scripts/cnc_strategy.pyruns · 17,015 bytes
scripts/create_cnc_mount_template.pyruns · 27,578 bytes
scripts/hold_line_bridge.pyruns · 16,597 bytes
scripts/native/HoldLineBridge.csasset · 13,443 bytes
scripts/native/NativeHoldLineAddin.cppasset · 8,665 bytes
scripts/native/NativeHoldLineAddin.defasset · 73 bytes
scripts/native/NativeHoldLineMacro.swbasset · 1,772 bytes
scripts/verify_advanced_fillets.pyruns · 41,839 bytes
scripts/verify_open_source_bracket.pyruns · 11,534 bytes
scripts/verify_open_source_complex_case.pyruns · 15,079 bytes

Read excerpt


# SolidWorks Fillet Chamfer CNC

## 先判定任务模式

圆角/倒角多的模型，主要风险是拓扑变化、错误选边和不可制造参数，不是 API 参数本身。

- 新建 CNC 安装座或验证参数时，先使用模板脚本的 `--dry-run`；计划通过后再连接 SolidWorks。
- 修改既有零件时，先读取 [详细经验](references/cnc-fillet-chamfer-lessons.md) 的“既有模型选边”部分，不套用模板的固定期望边数。
- 用户要求可变半径、面圆角、full-round 或 setback 时，先运行本子技能的高级能力探测；SolidWorks 版本或输入拓扑不同于已验证样例时保持 `pilot`，不要跨版本直接宣称稳定。
- 多控制点、曲面组合和宽度-宽度倒角已经有 SW2026 SP1.1 独立真机证据，但换版本或换拓扑仍须复跑；保持线圆角已经跨 Python、C# PIA、SWBasic 和进程内非托管 C++ 复测，故障边界收敛在本机 SW2026 SP1.1 的 `ISetHoldLines` 调用，而非 Python 单一语言限制。该构建必须保持 `pilot/blocked`，不能退化成普通面圆角后声称成功。

## 模板入口

先做无 COM 预检：