Menu

Individual skill

solidworks-threaded-holes

0upvotes

SolidWorks ISO 公制内螺纹孔自动化子技能。用于创建和审查 M3-M12 粗牙或用户明确底孔的自定义公制内螺纹，覆盖攻丝底孔、盲孔/贯穿孔、孔口倒角、右旋/左旋、ThreadFeatureData/CosmeticThread 降级和交付证据。用户要求 Hole Wizard、修改现有零件、外螺纹、英制/管螺纹或显式牙型时也应读取本技能，但这些能力必须按路线图标为 pilot 或人工复核，不得宣称已稳定实现。

subskills/solidworks-threaded-holes/SKILL.md

Read pinned source

Source commit 9ba848e301e996cc64d8078df13f4ccc24416339

What was checked

Matches the observed repository HEAD
Yes
Scanner rules are current
Yes
Repository scan complete
No
Skill scan complete
No
Observed behavior
Network or broad shell
Last checked
Nov 9, 2026

These are observations at the recorded commit, not a guarantee of safety. Review the source before running it.

Install this skill

Choose an agent in your Stack or copy a command below. Commands fetch the pinned commit and copy only this skill directory. Existing destinations are refused. Copying a command does not install anything.

An install command is unavailable: current rules, complete repository and skill scans, an eligible behavior level and a permitted license are required.

Repository context

Repository stars (not skill ratings)
1,962
Repository last updated
Nov 10, 2026
License
MIT

Observed agent integration: No specific integration evidence. Standard SKILL.md installation does not imply verified compatibility.

Files and excerpt

File metadata and permitted, redacted excerpts come from the recorded scan. Source links are pinned to that commit.

Browse files
Read excerpt

# SolidWorks Threaded Holes

## 先判定能力等级

当前稳定脚本是 `scripts/create_threaded_hole_template.py`，它在新建矩形样件上生成 ISO 公制内螺纹孔。

- `verified`：M3/M4/M5/M6/M8/M10/M12 粗牙内螺纹，盲孔或真正 `Through All` 底孔，孔口倒角，右旋/左旋，公差属性，真实 `Metric Tap` Thread 特征，STEP 和审查证据。已在 SolidWorks 2026 实测盲孔与贯穿孔。
- `reviewed`：表外 ISO 公制规格；必须由用户显式提供 `--tap-drill`，不得猜测底孔。
- `pilot`：对现有零件定位并改孔、Hole Wizard/Advanced Hole、外螺纹、英制/UN/UNF/NPT/BSP、多头螺纹、显式牙型与钻尖/退刀槽。执行前读取 [扩展路线图](references/threaded-hole-roadmap.md)。

## 稳定工作流

1. 从仓库根目录运行 `python scripts/sw_preflight.py`。
2. 确认螺纹规格、内/外螺纹、公差等级、旋向、盲孔/贯穿、螺纹深度、底孔深度、孔位和是否要求真实牙型。
Back to top