Individual skill

comet-classic

Comet Classic 工作流入口。当用户明确调用 /comet-classic、要求启动或恢复 Classic，或 resume-probe 返回 auto_resume、确认唯一可恢复的未归档 Classic change 时使用。

assets/skills-zh/comet-classic/SKILL.md

Read pinned source

Source commit 1fb0f070582714f8dd36cd01b7681a8aa0310942

What was checked

Matches the observed repository HEAD: Yes
Scanner rules are current: Yes
Repository scan complete: No
Skill scan complete: No
Observed behavior: Network or broad shell
Last checked: Nov 9, 2026

These are observations at the recorded commit, not a guarantee of safety. Review the source before running it.

Install this skill

Choose an agent in your Stack or copy a command below. Commands fetch the pinned commit and copy only this skill directory. Existing destinations are refused. Copying a command does not install anything.

An install command is unavailable: current rules, complete repository and skill scans, an eligible behavior level and a permitted license are required.

Repository context

Repository stars (not skill ratings): 3,285
Repository last updated: Nov 8, 2026
License: MIT

Observed agent integration: No specific integration evidence. Standard SKILL.md installation does not imply verified compatibility.

ai Repository topic
harness-engineering Repository topic
sdd Repository topic
skills Repository topic
spec Repository topic
eval Repository topic
skill-creator Repository topic
phase-guarded Repository topic
loop-engineering Repository topic
engineering Derived category

Files and excerpt

File metadata and permitted, redacted excerpts come from the recorded scan. Source links are pinned to that commit.

Browse files

SKILL.mdcore · 13,608 bytes
SKILL.mdcore · 13,608 bytes
agents/openai.yamlasset · 124 bytes
reference/auto-transition.mddoc · 3,723 bytes
reference/classic-layout.mddoc · 4,221 bytes
reference/comet-yaml-fields.mddoc · 18,650 bytes
reference/context-recovery.mddoc · 17,128 bytes
reference/debug-gate.mddoc · 2,812 bytes
reference/decision-point.mddoc · 12,951 bytes
reference/dirty-worktree.mddoc · 3,485 bytes
reference/file-structure.mddoc · 2,085 bytes
reference/intent-frame.mddoc · 11,059 bytes
reference/scripts.mddoc · 17,564 bytes
reference/sdk-methods.mddoc · 15,709 bytes
reference/subagent-dispatch.mddoc · 10,521 bytes
reference/workspace.mddoc · 2,173 bytes

Read excerpt


# Comet Classic — OpenSpec + Superpowers

Classic 分为 Open → Design → Build → Verify → Archive 五个阶段。OpenSpec 管理需求规格与归档，Superpowers 提供设计方法，以及用户选定的规划、执行和审查方法。完整流程（full）必须经过 brainstorming 和设计确认；hotfix/tweak 使用各自的预设步骤。

## 1. 确定目标与工作区

开始新任务或更换宿主时，必须读取并执行[宿主能力核对](../comet/reference/host-check.md)，在批准 Open 前确认当前流程所需的能力。执行配置改变后，只补核对新策略需要的能力。

开始或恢复前，按 `comet-classic/reference/classic-layout.md` 解析产物路径，并执行 `comet-classic/reference/scripts.md` 的“CLI 引导”。使用公开 Comet CLI 和 OpenSpec 适配器。所有参考按当前动作读取相关章节，复用上下文中仍有效的规则。

- 未明确调用 Classic、需要判定是否恢复已有工作时：读取 `comet-classic/reference/context-recovery.md` 的 Ambient Resume，按 `comet resume-probe . --stdin --json` 结果处理；只有 `auto_resume` 自动进入，`ask_user` 按 `reason` 使用 Ambient Resume 表格中的问题与选项提问，`out_of_scope`/`none` 不进入。
- 启动新需求或目标 change 尚不明确时：读取 `comet-classic/reference/intent-frame.md` 的最小示例与目标选择规则，获取未归档的 change 列表后填写 CometIntentFrame，运行 `comet classic intent route --stdin`。Agent 只负责按证据填写意图字段，路由由 Runtime 计算；以返回结果为准，不另写一套自然语言评分规则。
- 已明确目标 change 且已由 Runtime 初始化时：按下方绑定工作区；SDK 新 change 使用 `comet-state.yaml`，历史 `.comet.yaml` 原地读写，compat 初始化仍使用旧名，以 `state next` 返回的 Runtime 归属判断恢复路径，不能只看状态文件是否存在。有多个未归档的 change 且尚未选定时，不提前绑定。真正的新 change 直接交 `/comet-open` 或对应预设 Skill，它们会先准备工作区再初始化；`workspace resolve` 对未初始化的 change 会报 not found。