Individual skill

matlab-detect-capture-usrp

Smart triggered RF capture on NI USRP radios with Wireless Testbench — record only when a signal of interest appears, not continuously (triggered spectrum sensing). Use energy detection to capture when signal power rises above the noise floor, or preamble detection to cross-correlate against a known sequence (WLAN L-LTF, 5G NR PSS/SSS, LTE PSS, Zadoff-Chu, custom protocols) and capture only when that protocol's preamble is detected. Use when implementing triggered (wake-on-signal) capture or spectrum sensing, capturing protocol-based signals via cross-correlation, calibrating detection thresholds (plotDetectionSignals / plotThreshold), scanning frequency bands for activity, or building transmit-then-detect workflows.

skills-catalog/wireless-communications/matlab-detect-capture-usrp/SKILL.md

Source commit 032b4b605999b1f4adecaac1efa1c9faad41adf6

What was checked

Matches the observed repository HEAD

Yes

Scanner rules are current

Yes

Repository scan complete

No

Skill scan complete

Yes

Observed behavior

Instructions only

Last checked

Nov 3, 2026

These are observations at the recorded commit, not a guarantee of safety. Review the source before running it.

Install this skill

Choose an agent in your Stack or copy a command below. Commands fetch the pinned commit and copy only this skill directory. Existing destinations are refused. Copying a command does not install anything.

An install command is unavailable: current rules, complete repository and skill scans, an eligible behavior level and a permitted license are required.