Individual skill

matlab-set-up-usrp-radio

Set up and verify a connection to an NI USRP radio (USRP E320, N300, N310, N320, N321, X300, X310, or X410) using Wireless Testbench. Use when connecting a USRP for the first time, configuring radio hardware, troubleshooting connection failures, or verifying a radio setup. Covers host inspection (OS, NIC type/speed/MTU), device discovery (findsdru, probesdru), UHD version checking, programmatic radio configuration, and basebandTransceiver verification. Also use when the user mentions USRP setup, radio not found, connection errors, dropped samples, or network configuration for SDR hardware.

skills-catalog/wireless-communications/matlab-set-up-usrp-radio/SKILL.md

Source commit 032b4b605999b1f4adecaac1efa1c9faad41adf6

What was checked

Matches the observed repository HEAD

Yes

Scanner rules are current

Yes

Repository scan complete

No

Skill scan complete

No

Observed behavior

Network or broad shell

Last checked

Nov 3, 2026

These are observations at the recorded commit, not a guarantee of safety. Review the source before running it.

Install this skill

Choose an agent in your Stack or copy a command below. Commands fetch the pinned commit and copy only this skill directory. Existing destinations are refused. Copying a command does not install anything.

An install command is unavailable: current rules, complete repository and skill scans, an eligible behavior level and a permitted license are required.